Sector Sizes: 512 bytes logical, 4096 bytes physicalĭevice is: In smartctl database ĪTA Version is: ATA8-ACS T13/1699-D revision 4 Model Family: Seagate Barracuda 7200.14 (AF) Smartctl 6.5 r4214 (local build)Ĭopyright (C) 2002-16, Bruce Allen, Christian Franke, = START OF INFORMATION SECTION = Let’s get back on track and look at the basic information that smartctl prints, using a non-Samsung drive: Using computers involves a lot of detours. If it’s an older drive then you must decide if you want to apply the patch just to keep smartmontools happy. So how do you know if the patch is installed? Check the label on your hard drive, which should have the date of manufacture. “Update: According to Samsung Support, HD204UI drives manufactured December 2010 or later include the firmware patch…The warning will also be printed when the patch is already installed!” This is an issue with the disk firmware and not smartmontools, and it applies to hdparm as well. “Problem: If the system writes to this disk and smartctl -a (5.40) is used at the same time, write errors are reported and bad blocks appear on the disk.” The Smartmontools Wiki page offers actual information:
#SATA DISK HEALTH CHECK .EXE#
exe files to be usable on real operating systems. Check out Flashing BIOS from Linux in the Arch Linux Wiki to learn more about forcing. exe file that you can use in Linux, but it makes me tired and exasperated even thinking about it. There are ways to extract an image from an. What does that even mean? You can download a firmware patch from that page, but it’s an.
I was being sarcastic when I said it was enlightening. “If the host issues an identify command during an action of writing data in NCQ, the data’s writing can be destabilized, and can lead to data loss.” Just what everyone needs, an ambiguous warning that you may have just wrecked your hard drive. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******īuggy and fixed firmware report same version number! => WARNING: Using smartmontools or hdparm with thisĭrive may result in data loss due to a firmware bug. This should be uneventful, as it prints basic information about your drive including model number, serial number, firmware version, size, sector size, and if it is SMART-enabled.
#SATA DISK HEALTH CHECK INSTALL#
Install it and then query basic information about one of your drives: The main command that you will use is smartctl. Whatever Linux you use, the package name is probably smartmontools. It’s not 100 percent accurate at predicting imminent drive failure, so, as you should always do, keep current backups. SMART is the Self-Monitoring, Analysis and Reporting Technology built-in to modern drives, and smartmontools reads the SMART data. Smartmontools helps you keep an eye on the health of your hard disk and SSD drives.
0 kommentar(er)
